DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Registrant’s 2023 Proxy Statement for the Annual Meeting of the Stockholders (the “Proxy Statement”) are incorporated by reference into Part III hereof. Except with respect to information specifically incorporated by reference in this Form 10-K, the Proxy Statement is not deemed to be filed as a part hereof.

Introductory Note: Caution Concerning Forward-Looking Statements

This Annual Report on Form 10-K (this “Annual Report”) and the Company’s other communications and statements may contain certain “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), including statements about the Company’s beliefs, plans, objectives, goals, expectations, estimates, projections and intentions. All forward-looking statements, by their nature, are subject to significant risks and uncertainties and are subject to change based on various factors, many of which are beyond the Company’s control. The Company’s actual future results may differ materially from those set forth in the Company’s forward-looking statements depending on a variety of important factors, including the financial condition of the Company’s customers, changes in the economic and competitive environments; demand for the Company’s products; the duration and scope of the coronavirus (“COVID-19”) pandemic and its variants; actions government entities and businesses take in response to the COVID-19 pandemic, including mandatory business closures; the impact of the pandemic and actions taken on regional economies; and the pace of recovery when the COVID-19 pandemic subsides. In addition, on February 24, 2022, Russian military forces invaded Ukraine. The impact to Ukraine from the invasion as well as actions taken by other countries, including new and stricter sanctions imposed by the U.S. and other countries and companies against officials, individuals, regions, and industries in Russia, and actions taken by Russia and certain other countries in response to such sanctions, could result in a disruption in our supply chain and higher costs of our products. The words “may,” “could,” “should,” “would,” “believe,” “anticipate,” “estimate,” “expect,” “intend,” “plan,” “target,” “goal,” and similar expressions are intended to identify forward-looking statements.

For information concerning these factors and related matters, see “Risk Factors” in Part I, Item 1A in this Annual Report, and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Part II, Item 7 in this Annual Report. However, other factors besides those referenced could adversely affect the Company’s results, and you should not consider any such list of factors to be a complete set of all potential risks or uncertainties. Any forward-looking statements made by the Company herein speak as of the date of this Annual Report. The Company does not undertake to update any forward-looking statement, except as required by law.

2

PART I

General

Gencor Industries, Inc. and its subsidiaries (the “Company,” “Gencor,” “we,” “us” or “our”) is a leading manufacturer of heavy machinery used in the production of highway construction equipment and materials and environmental control equipment.    The Company’s products are manufactured in the United States and sold through a combination of Company sales representatives and independent dealers and agents located throughout the world.

The Company designs, manufactures and sells machinery and related equipment used primarily for the production of asphalt and highway construction equipment and materials. The Company’s principal core products include asphalt pavers, hot mix asphalt plants, combustion systems, and fluid heat transfer systems. The Company believes that its technical and design capabilities and environmentally friendly process technology have enabled it to become a leading producer of hot mix asphalt plants and related components in North America. The Company believes it has the largest installed base of asphalt plants in the United States.

Because the Company’s products are sold primarily to companies in the highway construction industry, its business has historically been seasonal. Traditionally, the Company’s customers do not purchase new equipment during the summer and fall months to avoid disrupting their peak season for highway construction and repair work. The majority of orders for the Company’s asphalt plants and pavers are typically received between October and February, with a significant volume of shipments occurring prior to June. The principal factors driving demand for the Company’s products are the level of federal and state funding for domestic highway construction and repair, the replacement of existing plants, and a trend towards efficient, larger plants.

In 1968, the Company was formed by the merger of Mechtron Corporation with General Combustion, Inc. (“General Combustion”) and Genco Manufacturing, Inc. The new entity reincorporated in Delaware in 1969 and adopted the name Mechtron International Corporation in 1970. In 1985, the Company began a series of acquisitions into related fields starting with the Beverley Group Ltd. (“Beverley”) in the United Kingdom. Hy-Way Heat Company, Inc. (“Hy-Way Heat”) and the Bituma Group were acquired in 1986. In 1987, the Company changed its name to Gencor Industries, Inc. and acquired Davis Line Inc. and its subsidiaries in 1988.

In 1998, the Company entered into agreements with Carbontronics, LLC, pursuant to which the Company designed, manufactured, sold and installed four synthetic fuel production plants. In addition to payment for the plants, the Company received membership interests in two synthetic fuel entities. These derived significant cash flows from the sale of synthetic fuel and tax credits (Internal Revenue Code, Section 29) and, consequently, distributed significant cash to the Company from 2001 to 2010.

The tax credit legislation expired at the end of calendar year 2007. Consequently, the four synthetic fuel plants were decommissioned. The plants were sold or transferred to site owners in exchange for a release of all contracted liabilities related to the removal of plants from the sites. Gencor’s ownership in the two synthetic fuel entities ended in 2013.

On October 1, 2020, the Company acquired the Blaw-Knox assets from Volvo Construction Equipment North America, LLC (“Volvo CE”). The acquisition expanded the Company’s product offerings by adding highway class asphalt pavers to its asphalt plant and related equipment products.

Products

Asphalt Plants. The Company manufactures and produces hot-mix asphalt plants used in the production of asphalt paving materials. The Company also manufactures related asphalt plant equipment, including hot-mix storage silos, fabric filtration systems, cold feed bins and other plant components. The Company’s H&B (Hetherington and Berner) product line is the world’s oldest asphalt plant line, first manufactured in 1894. The Company’s subsidiary, Bituma Corporation, formerly known as Boeing Construction Company, developed the first continuous process for asphalt production. Gencor developed and patented the first counter flow drum mix technology, several adaptations of which have become the industry standard, which recaptures and burns emissions and vapors, resulting in a cleaner and more efficient process. The Company also manufactures a very comprehensive range of fully mobile batch plants.

3

Combustion Systems and Industrial Incinerators. The Company manufactures combustion systems, which are large burners that can transform most solid, liquid or gaseous fuels into usable energy, or burn multiple fuels, alternately or simultaneously. Through its subsidiary General Combustion, the Company has been a significant source of combustion systems for the asphalt and aggregate drying industries since the 1950’s. The Company also manufactures combustion systems for rotary dryers, kilns, fume and liquid incinerators and fuel heaters. The Company believes maintenance and fuel costs are lower for its burners because of their superior design.

Fluid Heat Transfer Systems. The Company’s General Combustion subsidiary manufactures the Hy-Way Heat and Beverley lines of thermal fluid heat transfer systems and specialty storage tanks for a wide array of industry uses. Thermal fluid heat transfer systems are similar to boilers, but use high temperature oil instead of water. Thermal fluid heaters have been replacing steam pressure boilers as the best method of heat transfer for storage, heating and pumping viscous materials (i.e., asphalt, chemicals, heavy oils, etc.) in many industrial and petrochemical applications worldwide. The Company believes the high-efficiency design of its thermal fluid heaters can outperform competitive units in many types of process applications.

Asphalt Pavers. The Company manufactures asphalt pavers under the Blaw-Knox brand. The Blaw-Knox brand dates back over a century, when in 1917 Blaw Collapsible Steel Centering Company merged with the Knox Pressed and Welded Steel Company. Blaw-Knox made its first road paving equipment in 1929. Blaw-Knox pavers are the industry leading, highway class pavers that deliver outstanding reliability and produce the highest quality rideable surfaces in the industry. Projects paved with Blaw-Knox pavers continually win industry awards for the highest quality highway pavements.

Product Engineering and Development

The Company is engaged in product engineering and development efforts to expand its product lines and to further develop more energy-efficient and environmentally friendly equipment.

Product engineering and development activities are directed toward more efficient methods of producing asphalt and lower cost fluid heat transfer systems. In addition, efforts are also focused on developing combustion systems that operate at higher efficiency and offer a higher level of environmental compatibility.

Sources of Supply and Manufacturing

Substantially all products and components sold by the Company and its subsidiaries are manufactured and assembled by the Company. The Company purchases steel, other raw materials and hardware used to manufacture its products from numerous suppliers. The Company may augment internal production by outsourcing some of its production when demand for its products exceeds its manufacturing capacity.

Seasonality

The Company is concentrated in the manufacturing of asphalt pavers, asphalt plants and related components, which is typically subject to a seasonal slow-down during the third and fourth quarters of the calendar year.

Competition

The markets for the Company’s products are highly competitive. The industry remains fairly concentrated, with a small number of companies competing for the majority of the Company’s product lines. The principal competitive factors include quality, price, delivery, availability, and technology. The Company believes it manufactures the highest quality equipment in the industry. Its products’ performance reliability, brand recognition, pricing, and after-the-sale technical support are other important factors.

4

Sales and Marketing

The Company’s products and services are marketed through Company-employed sales representatives and independent dealers.

Sales Backlog

The size of the Company’s backlog should not be viewed as an indicator of the Company’s quarterly or annualized revenues, due to the timing of order fulfillment of asphalt plants. The Company’s backlog was $43.2 million and $53.1 million as of December 1, 2022 and December 1, 2021, respectively.

Financial Information about Geographic Areas Reporting Segments

See Reporting Segments and Geographic Areas in Note 1 to the Consolidated Financial Statements.

Licenses, Patents and Trademarks

The Company holds numerous patents covering technology and applications related to various products, equipment and systems, and numerous trademarks and trade names registered with the U.S. Patent and Trademark Office and in various foreign countries. In general, the Company depends upon technological capabilities, manufacturing quality control and application know-how, rather than patents or other proprietary rights in the conduct of its business.

Government Regulations

The Company believes its design and manufacturing processes meet all industry and governmental agency standards that may apply to its entire line of products, including all domestic and foreign environmental, structural, electrical and safety codes. The Company’s products are designed and manufactured to comply with U.S. Environmental Protection Agency regulations. Certain state and local regulatory authorities have strong environmental impact regulations. While the Company believes that such regulations have helped, rather than restricted its marketing efforts and sales results, there is no assurance that changes to federal, state, local, or foreign laws and regulations will not have a material adverse effect on the Company’s products and earnings in the future.

Environmental Matters

The Company is subject to various federal, state, local and foreign laws and regulations relating to the protection of the environment. The Company believes it is in compliance with all applicable environmental laws and regulations. The Company does not expect any material impact on future operating costs as a result of compliance with currently enacted environmental regulations.

Employees

As of September 30, 2022, the Company had 367 full-time employees. The Company has a collective bargaining agreement covering employees at its Marquette, Iowa facility. No other employees are represented by a labor union or collective bargaining agreement.

Available Information

For further discussion concerning the Company’s business, see the information included in Item 7 (Management’s Discussion and Analysis of Financial Condition and Results of Operations) and Item 8 (Financial Statements and Supplementary Data) of this Annual Report.

5

The Company makes available free of charge through its website at www.gencor.com the Company’s Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and all amendments to those reports, if applicable, filed or furnished pursuant to Sections 13(a) and 15(d) of the Exchange Act, as soon as reasonably practicable after the material is electronically filed with or furnished to the Securities and Exchange Commission (“SEC”). The information posted on the website is not incorporated into this Annual Report.

6

The following risk factors and other information included in this Annual Report should be carefully considered. The risks and uncertainties described below are not the only ones the Company faces. Additional risks and uncertainties not presently known to the Company, or that the Company presently deems less significant, may also impair the Company’s operations. If any of the following risks actually occur, the Company’s business operating results and financial condition could be materially adversely affected. The order of these risk factors does not reflect their relative importance or likelihood of occurrence.

The business is affected by the cyclical nature of the markets it serves.

The demand for the Company’s products is dependent on general economic conditions and more specifically, Federal and state funding for highways and roads. Adverse economic conditions may cause customers to forego or delay new purchases and rely more on repairing existing equipment thus negatively impacting the Company’s sales and profits.

The business is affected by the level of government funding for highway construction in the United States and Canada.

Most highway contractors in the U.S. and Canada depend on funding by federal, provincial, state and local agencies for highway, transit and infrastructure programs. Future legislation may increase or decrease government spending, which, if decreased, could have a negative effect on the Company’s financial condition or results of operations. Federal and/or state funding allocated to infrastructure may decrease in the future.

Previously, the Company depended on one customer for a significant portion of its revenue. The loss of any relationship with a large customer, or a significant downturn in the business or financial condition of any such customer, could have adverse consequences on the Company’s future business.

No customer accounted for 10% or more of fiscal 2022 or 2021 revenues. If the Company had customers that accounted for a significant portion of its net revenues, then the loss of any of those customers, or a significant reduction in sales to any such customer, could adversely affect the Company’s revenues and, consequently, its business.

If the Company fails to comply with requirements relating to internal control over financial reporting under Section 404 of the Sarbanes-Oxley Act, the business could be harmed and its stock price could decline.

Rules adopted by the SEC pursuant to Section 404 of the Sarbanes-Oxley Act of 2002 require the Company to assess its internal control over financial reporting annually. The rules governing the standards that must be met for management to assess its internal control over financial reporting are complex. They require significant documentation, testing, and possible remediation of any significant deficiencies in and/or material weaknesses of internal controls in order to meet the detailed standards under these rules. The Company has evaluated its internal control over financial reporting as effective as of September 30, 2022. See Item 9A – Controls and Procedures – Management’s Annual Report on Internal Control over Financial Reporting. Although the Company concluded that its internal control over financial reporting was effective as of September 30, 2022, in future fiscal years, the Company may encounter unanticipated delays or problems in assessing its internal control over financial reporting as effective or in completing its assessments by the required dates. In addition, the Company cannot be assured that, if required, its independent registered public accountants will attest that internal control over financial reporting is effective in future fiscal years. If the Company cannot assess its internal control over financial reporting as effective, investor confidence and share value may be negatively impacted.

The Company may be required to reduce its profit margins on contracts where revenues are recognized over time.

Revenues from contracts with customers for the design, manufacture and sale of custom equipment are recognized over time when the performance obligation is satisfied by transferring control of the equipment. Control of the equipment transfers over time as the equipment is unique to the specific contract and thus does not create an asset with an alternative use. Revenues and costs are recognized in proportion to actual labor costs incurred, as compared with total

7

estimated labor costs expected to be incurred during the entire contract. As a result, revisions made to the estimates of revenues and profits are recorded in the period in which the conditions that require such revisions become known and can be estimated. Although the Company believes that its profit margins are fairly stated and that adequate provisions for losses for its fixed-price contracts are recorded in the financial statements, as required by accounting principles generally accepted in the United States of America (“GAAP”), the Company cannot assure that its estimated contract profit margins will not decrease or its estimated loss provisions will not increase materially in the future.

The Company may encounter difficulties with acquisitions.

As part of its growth strategy, the Company intends to evaluate the acquisition of other companies, assets or product lines that would complement or expand the Company’s existing business or broaden its customer base. Although the Company conducts due diligence reviews of potential acquisition candidates, it may not be able to identify all material liabilities or risks related to potential acquisition candidates. There can be no assurance that the Company will be able to locate and acquire any business, retain key personnel and customers of an acquired business or integrate any acquired business successfully. Additionally, there can be no assurance that financing for any acquisition, if necessary, will be available on acceptable terms, if at all, or that the Company will be able to accomplish its strategic objectives in connection with any acquisition.

The Company’s marketable securities are comprised of cash and money funds, equities, corporate bonds, mutual funds, exchange-traded funds, and government securities invested through professional investment management firms and are subject to various risks, such as interest rates, markets, and credit.

The Company’s marketable securities are comprised of cash and money funds, equities, corporate bonds, mutual funds, exchange-traded funds, and government securities invested through professional investment management firms and are subject to various risks, such as interest rate risk, market risk, and credit risk. Due to the level of risk associated with certain investment securities and the level of uncertainty related to changes in the value of securities, adverse developments with respect to interest rates, the capital markets or the credit markets could have a material adverse impact on the value of these investment securities and ultimately, the Company’s results of operations.

There are and will continue to be quarterly fluctuations of the Company’s operating results.

The Company’s operating results historically have fluctuated from quarter to quarter as a result of a number of factors, including the value, timing and shipment of individual orders and the mix of products sold. Revenues from contracts with customers for the design, manufacture and sale of custom equipment are recognized over time when the performance obligation is satisfied by transferring control of the equipment. Revenues from all other contracts for the design and manufacture of equipment, for service and for parts sales, net of any discounts and return allowances, are recorded at a point in time when control of the goods or services has been transferred. The Company’s asphalt production equipment operations are subject to seasonal fluctuations, which may lower revenues and result in possible quarterly operating losses.

If the Company is unable to attract and retain key personnel, its business could be adversely affected.

The success of the Company will continue to depend substantially upon the efforts, abilities and services of its management team and certain other key employees. The loss of one or more key employees could adversely affect the Company’s operations. The Company’s ability to attract and retain qualified personnel, either through direct hiring, or acquisition of other businesses employing such persons, will also be an important factor in determining its future success.

8

The Company may be required to defend its intellectual property against infringement or against infringement claims of others.

The Company holds numerous patents covering technology and applications related to various products, equipment and systems, and numerous trademarks and trade names registered with the U.S. Patent and Trademark Office and in various foreign countries. There can be no assurance as to the breadth or degree of protection that future patents or trademarks may afford the Company, or that any pending patent or trademark applications will result in issued patents or trademarks, or that the Company’s patents, registered trademarks or patent applications, if any, will be upheld if challenged, or that competitors will not develop similar or superior methods or products outside the protection of any patents issued, licensed or sublicensed to the Company. Although the Company believes that none of its technologies, products or trademarks infringe upon the patents, technologies, products or trademarks of others, it is possible that the Company’s trademarks or other rights may not be valid or that infringement of future patents, trademarks or proprietary rights may occur. In the event that the Company’s products are deemed to infringe upon the patent or proprietary rights of others, the Company could be required to modify the design of its products, change the name of its products or obtain a license for the use of certain technologies incorporated into its products. There can be no assurance that the Company would be able to do any of the foregoing in a timely manner, upon acceptable terms and conditions, or at all, and the failure to do so could have a material adverse effect on the Company. In addition, there can be no assurance that the Company will have the financial or other resources necessary to enforce or defend a patent, registered trademark or other proprietary right, and, if the Company’s products are deemed to infringe upon the patents, trademarks or other proprietary rights of others, the Company could become liable for damages, which could also have a material adverse effect on the Company.

The Company may be subject to substantial liability for its products.

The Company is engaged in a business that could expose it to possible liability claims for personal injury or property damage due to alleged design or manufacturing defects in its products. The Company believes that it meets existing professional specification standards recognized or required in the industries in which it operates, and there are no material product liability claims pending against the Company as of the date hereof. Although the Company currently maintains product liability coverage, which it believes is adequate for the continued operation of its business, such insurance may prove inadequate or become difficult to obtain or unobtainable in the future on terms acceptable to the Company.

The Company is subject to extensive environmental laws and regulations, and the costs related to compliance with, or the Company’s failure to comply with, existing or future laws and regulations, could adversely affect the business and results of operations.

The Company’s operations are subject to federal, state, local and foreign laws and regulations relating to the protection of the environment. Sanctions for noncompliance may include revocation of permits, corrective action orders, significant administrative or civil penalties and criminal prosecution. The Company’s business involves environmental management and issues typically associated with historical manufacturing operations. To date, the Company’s cost of complying with environmental laws and regulations has not been material, but the fact that such laws or regulations are changed frequently makes predicting the cost or impact of such laws and regulations on the Company’s future operations uncertain.

The Company is dependent upon third-party suppliers, making it vulnerable to supply shortages and price increases.

The principal raw material the Company uses is carbon steel which is sourced through numerous suppliers. The Company also uses select suppliers to provide proprietary components to its finished products. Although the Company believes that raw materials are available from alternate sources, an interruption in the supply of steel or related products or a substantial increase in the price of steel or related products could have a material adverse effect on the Company’s production and its results of operations.

In addition, the cost of parts or materials may increase significantly for reasons other than changes in commodity prices. Factors such as supply and demand, freight costs, availability of transportation, availability of labor, inventory levels, the level of imports, the imposition of duties and tariffs and other trade barriers and general economic conditions may affect the price of our parts or materials. Market conditions could limit the Company’s ability to raise selling prices to offset increases in material and/or labor costs.

9

In the future, we could experience some disruption in the supply of some of our parts or materials that we purchase from suppliers. Delays in obtaining parts or materials may result from a number of factors affecting our suppliers including capacity constraints, labor shortages or supplier product quality issues. These risks are increased in a weak economic environment or when demand increases coming out of an economic downturn. Such disruptions could result in manufacturing inefficiencies caused by the Company having to wait for parts to arrive on production lines, could delay sales and could result in a material adverse effect on the Company’s results of operations, financial condition, and/or cash flows.

The Company is subject to government regulations.

The Company is committed to responsible environmental, social and governance (“ESG”) practices. The Company strives to be recognized as a company that achieves customer expectations safely and in a manner that rewards both its customers and its employees. The Company strives to achieve these goals through an organizational structure that provides excellent service and a reputation of integrity with the communities where it operates while providing its employees with growth opportunities in an injury-free environment.

The Company is subject to a variety of governmental regulations relating to the manufacturing of its products. Failure by the Company to comply with regulations could subject it to liabilities, or suspension of production that could have a material adverse effect on the Company’s results. Such regulations could also restrict the Company’s ability to expand its facilities, or to incur other expenses to comply with such regulations. Although the Company believes it has the design and manufacturing capability to meet all industry or governmental agency standards that may apply to its product lines, including all domestic and foreign environmental, structural, electrical and safety codes, there can be no assurance that governmental laws and regulations will not become more stringent over time, imposing greater compliance costs and increasing risks and penalties associated with a violation. The cost to the Company of such compliance to date has not materially affected its business, financial condition or results of operations. There can be no assurance, however, that violations will not occur in the future as a result of human error, equipment failure or other causes. The Company’s customers are also subject to extensive regulations, including those related to the workplace. The Company cannot predict the nature, scope or effect of governmental legislation, or regulatory requirements that could be imposed or how existing or future laws or regulations will be administered, or interpreted. Compliance with more stringent laws or regulations, as well as more vigorous enforcement policies of regulatory agencies, could require substantial expenditures by the Company and could adversely affect its business, financial condition and results of operations.

Increasing scrutiny and changing expectations from stakeholders with respect to the Company’s ESG practices may expose us to new or additional risks.

Companies across many industries are facing increasing scrutiny from stakeholders related to their ESG practices. Investor advocacy groups, certain institutional investors, investment funds and other influential investors are also increasingly focused on ESG practices and in recent years have placed increasing importance on the implications and social cost of their investments. Regardless of the industry, investors’ and stakeholders’ increased focus related to stakeholder ESG expectations and standards, which are evolving, may cause the Company to suffer from reputational damage and its business or financial condition could be adversely affected.

The Company’s management has effective voting control.

The Company’s officers beneficially own 100% of the outstanding shares of the Company’s Class B stock. The holders of the Class B stock are entitled to elect 75% (calculated to the nearest whole number, rounding five-tenths to next highest whole number) of the members of the Company’s Board of Directors. Further, approval of a majority of the holders of the Class B stock is generally required to affect a sale of the Company and certain other corporate transactions. As a result, the Class B shareholders can elect more than a majority of the Board of Directors and exercise significant influence over most matters requiring approval by the Company’s shareholders. This concentration of control may also have the effect of delaying or preventing a change in control.

10

The issuance of preferred stock may impede a change of control or may be dilutive to existing shareholders.

The Company’s Certificate of Incorporation, as amended, authorizes the Company’s Board of Directors, without shareholder vote, to issue up to 300,000 shares of preferred stock in one or more series and to determine for any series the dividend, liquidation, conversion, voting or other preferences, rights and terms that are senior, and not available, to the holders of the Company’s common stock. Thus, issuances of series of preferred stock could adversely affect the relative voting power, distributions and other rights of the common stock. The issuance of preferred stock could deter or impede a merger, tender offer or other transaction that some, or a majority of the Company’s common shareholders might believe to be in their best interest or in which the Company’s common shareholders might receive a premium for their shares over the then current market price of such shares.

The Company may be required to indemnify its directors and executive officers.

The Company has authority under Section 145 of the Delaware General Corporation Law to indemnify its directors and officers to the extent provided in that statute. The Company’s Certificate of Incorporation, as amended, provides that a director shall not be personally liable to the Company for breach of fiduciary duty as a director, except to the extent such exemption from liability or limitation thereof is not permitted under the Delaware General Corporation Law. The Company’s Bylaws provide, in part, that it indemnify each of its directors and officers against liabilities imposed upon them (including reasonable amounts paid in settlement) and expenses incurred by them in connection with any claim made against them or any action, suit or proceeding to which they may be a party by reason of their being or having been a director or officer. The Company maintains officers’ and directors’ liability insurance coverage. There can be no assurance that such insurance will be available in the future, or that if available, it will be available on terms that are acceptable to the Company. Furthermore, there can be no assurance that the insurance coverage provided will be sufficient to cover the amount of any judgment awarded against an officer or director (either individually or in the aggregate). Consequently, if such judgment exceeds the coverage under the policy, the Company may be forced to pay such difference.

The Company enters into indemnification agreements with each of its executive officers and directors containing provisions that may require the Company, among other things, to indemnify them against certain liabilities that may arise by reason of their status or service as officers or directors (other than liabilities arising from willful misconduct of a culpable nature) and to advance their expenses incurred as a result of any proceeding against them as to which they could be indemnified. Management believes that such indemnification provisions and agreements are necessary to attract and retain qualified persons as directors and executive officers.

The Company does not expect to pay cash dividends for the foreseeable future.

The Company intends to retain its cash to fund its business requirements. It does not anticipate paying cash dividends on its common stock or Class B stock. Any future determination to pay cash dividends will be at the discretion of the Company’s Board of Directors and will be dependent upon existing conditions, including the financial condition and results of operations, capital requirements, contractual restrictions, business prospects, and other factors that the Board of Directors considers relevant.

Competition could reduce revenue from the Company’s products and services and cause it to lose market share.

The Company currently faces strong competition in product performance, price and service. Some of the Company’s competitors have greater financial, product development and marketing resources than the Company. If competition in the Company’s industry intensifies or if the current competitors enhance their products or lower their prices for competing products, the Company may lose sales or be required to lower the prices it charges for its products. This may reduce revenues from the Company’s products and services, lower its gross margins, or cause a loss in market share.

The Company’s quarterly operating results are likely to fluctuate, which may decrease its stock price.

The Company’s quarterly operating results have varied significantly in the past and are likely to vary significantly from quarter to quarter in the future. As a result, the Company’s operating results may fall below the expectations of securities analysts and investors in some quarters, which could result in a decrease in the market price of its common stock. The reasons the Company’s quarterly results may fluctuate include:

11

Period-to-period comparisons of such items should not be relied on as indications of future performance.

The Company’s common stock has been, and likely will continue to be, subject to substantial price and volume fluctuations due to a number of factors, many of which will be beyond the Company’s control.

The market price of the Company’s common stock may be significantly affected by various factors, such as:

The Company’s business, results of operations, financial condition, cash flows, and the stock price of its common stock could be adversely affected by the COVID-19 pandemic.

The Company’s business, results of operations financial condition, cash flows, and the stock price of its common stock can be adversely affected by pandemics or other public health emergencies, such as the recent outbreak of COVID-19 and its variants. In March 2020, the World Health Organization (“WHO”) declared COVID-19 as a pandemic. The COVID-19 pandemic has resulted in governments around the world implementing increasingly stringent measures to help control the spread of the virus, including “stay at home” orders, travel restrictions, business curtailments, school closures, and other measures.

The outbreak of COVID-19 (including any variants) and any preventive or protective actions taken by governmental authorities may have a material adverse effect on the Company’s operations, supply chain, customers, and transportation networks, including business shutdown or disruptions. The extent to which COVID-19 and its variants may adversely impact the Company’s business depends on future developments, which are highly uncertain and unpredictable, depends upon the severity and duration of the outbreak and the effectiveness of actions taken globally to contain or mitigate its effect. Any resulting financial impact cannot be estimated reasonably at this time, but may materially adversely affect the Company’s business, results of operations, financial condition, and cash flows. Even after the COVID-19 pandemic has subsided, the Company may experience materially adverse impacts to its business due to any resulting economic downturn. Additionally, concerns over the economic impact of COVID-19 and its variants have caused volatility in financial and other capital markets, which has and may continue to adversely impact the Company’s stock price, its ability to access capital markets, and the value of its investment portfolio. To the extent the COVID-19 pandemic adversely affects the Company’s business and financial results it may also have the effect of heightening many of the other risks described in this Annual Report, such as those relating to the Company’s products and financial performance.

12

Global, market and economic conditions may negatively impact our business, financial condition and share price.

Concerns over inflation, geopolitical issues, global financial markets and the COVID-19 pandemic have led to increased economic instability and expectations of slower global economic growth. Our business may be adversely affected by any such economic instability or unpredictability. Russia’s invasion of Ukraine and related sanctions has led to increased oil and natural gas prices. Such sanctions and disruptions to the global economy may lead to additional inflation and may disrupt the global supply chain and could have a material adverse effect on our ability to secure supplies. The increased cost of oil, along with increased or prolonged periods of inflation, would likely increase our costs in the form of higher wages, further inflation on supplies and equipment necessary to operate our business. There is a risk that one or more of our suppliers could be negatively affected by global economic instability, which could adversely affect our ability to operate efficiently and timely complete our operational goals.

The Company may suffer adverse consequences if it is deemed an investment company under the Investment Company Act of 1940, as amended (the “Investment Company Act”).

Under Section 3(a)(1)(A) of the Investment Company Act, a company is deemed to be an investment company if it is, or holds itself out as being, engaged primarily, or proposes to engage primarily, in the business of investing, reinvesting, or trading in securities. The Company believes that it is not an investment company under Section 3(a)(1)(A) of the Investment Company Act because it does not hold itself out as being engaged primarily in the business of investing, reinvesting, or trading in securities. Rather, the Company has been a manufacturer of heavy equipment used in the production of asphalt for highway construction and environmental control equipment for over 50 years. The Company’s core products include asphalt plants, combustion systems, and fluid heat transfer systems. The Company is expanding its product offerings through new product introductions and its 2020 acquisition of an asphalt paver product line.

Under Section 3(a)(1)(C) of the Investment Company Act, a company is deemed to be an investment company if it is engaged, or proposes to engage in the business of investing, reinvesting, owning, holding, or trading in securities and owns or proposes to acquire investment securities having a value exceeding 40% of the value of its total assets (exclusive of U.S. Government securities and cash items) on an unconsolidated basis. As reflected on the Company’s balance sheet at September 30, 2022, the Company owns a significant amount of marketable securities, which include cash, cash equivalents, government and corporate bonds, mutual funds, exchange-traded funds and equities. Section 3(a)(2) defines the term “investment securities”, as used in Section 3(a)(1)(C) to include all marketable securities except government securities and cash and cash equivalents. The value of the Company’s investment securities exceeded 40% of the value of its total assets (excluding government securities and cash items) at September 30, 2022. Because of the value of its investment securities, the Company may be deemed an investment company. The Company believes that it is not an investment company under Section 3(a)(1)(C) of the Investment Company Act because it does not propose to engage in the business of investing, reinvesting, owning, holding, or trading in securities. In addition, if the Company was deemed an investment company under Section 3(a)(1)(C), it believes that it will qualify for an exemption from the definition of an investment company as it is primarily engaged in a business other than that of investing, reinvesting, owning, holding, or trading in securities. As noted above, the Company is primarily engaged in the manufacturing of heavy equipment. If the SEC or a court challenged the Company’s status as an operating company, it could incur significant legal expenses.

If the Company was deemed to be, and was required to register as an investment company, the Company would be forced to comply with the legal requirements of the Investment Company Act that would regulate the manner in which the Company would be permitted to conduct its business activities. As an investment company, the Company would be (i) subjected to disclosure and accounting guidance geared toward investment, rather than operating, companies; (ii) significantly limited in its ability to borrow money, issue options, issue multiple classes of stock and debt, and engage in transactions with affiliates; and (iii) required to undertake significant costs and expenses to meet other disclosure, reporting, and regulatory requirements to which it would be subject as a registered investment company.

The Company faces risks with the acquisition of Blaw-Knox and any future acquisitions.

The Company acquired the Blaw-Knox assets on October 1, 2020. The success of this acquisition depends, in part, on the Company’s ability to successfully grow the business and realize anticipated benefits, including any synergies. It may take longer than expected to realize growth in the business or realize anticipated benefits, which may be smaller than the Company expected. Also, there are a number of challenges and risks involved in the Company’s ability to successfully integrate Blaw-Knox with its current business. Any of these factors could have a material adverse effect on the Company’s business, financial condition, results of operations, or cash flows.

13

Acquiring businesses or products that expand and/or complement the Company’s operations has been an element of its business strategy. The Company continues to evaluate potential acquisitions that may expand and/or complement its business. The Company may not be able to successfully identify attractive acquisition candidates or negotiate favorable terms in the future. Furthermore, the Company’s ability to effectively integrate any future acquisitions will depend on, among other things, the adequacy of its implementation plans, the ability of its management to oversee and operate effectively the combined operations, and the Company’s ability to achieve desired operational efficiencies. The Company’s failure to successfully integrate the operations of any business that it may acquire in the future may adversely affect our business, financial position, results of operations, or cash flows.

There can be a shortage of skilled production workers, especially those with welding and/or fabricating capabilities. The Company could experience difficulty hiring or replacing those individuals, which could adversely affect its business.

Our fabrication process requires skilled production workers. If we are unable to retain and hire an adequate number of individuals with welding and fabrication capabilities, this could adversely impact our ability to achieve our financial objectives. In addition, if demand for skilled production workers were to significantly outstrip supply, wages for these workers could dramatically increase and could affect our financial performance.

14

None

The following table lists the operating properties owned or leased by the Company as of September 30, 2022:

The Company has various litigation and claims, either as a plaintiff or defendant, pending as of the date of this Annual Report, which have occurred in the ordinary course of business, and which may be covered in whole, or in part, by insurance. Management has reviewed all litigation matters arising in the ordinary course of business and, upon advice of legal counsel, has made provisions, not deemed material, for any probable losses and expenses of litigation.

None

15

PART II

The Company’s common stock is traded on the NYSE American LLC under the symbol “GENC.”

The Company has not issued any securities during the prior two years that were not already registered under the Exchange Act.

As of September 30, 2022, there were 187 holders of common stock of record and 6 holders of Class B stock of record. The Company has not paid cash dividends during the last two fiscal years and has no intention to pay cash dividends in the foreseeable future.

EQUITY COMPENSATION PLANS

The Company’s 2009 Incentive Compensation Plan expired on October 1, 2021. There are no other existing equity compensation plans and arrangements previously approved by security holders as of September 30, 2022.

16

“Forward-Looking” Information

This Annual Report contains certain “forward-looking statements” within the meaning of the Exchange Act, which represent the Company’s expectations and beliefs, including, but not limited to, statements concerning gross margins, sales of the Company’s products and future financing plans, income from investees and litigation. These statements by their nature involve substantial risks and uncertainties, certain of which are beyond the Company’s control. Actual results may differ materially depending on a variety of important factors, including the financial condition of the Company’s customers, changes in the economic and competitive environments, the performance of the investment portfolio and the demand for the Company’s products.

For information concerning these factors and related matters, see “Risk Factors” in Part I, Item 1A in this Annual Report. However, other factors besides those referenced could adversely affect the Company’s results, and you should not consider any such list of factors to be a complete set of all potential risks or uncertainties. Any forward-looking statements made by the Company herein speak as of the date of this Annual Report. The Company does not undertake to update any forward-looking statements, except as required by law.

Overview

Gencor is a leading manufacturer of heavy machinery used in the production of highway construction equipment and materials and environmental control equipment. The Company’s core products include asphalt pavers, hot mix asphalt plants, combustion systems, fluid heat transfer systems and asphalt pavers. The Company’s products are manufactured at three facilities in the United States.

Because the Company’s products are sold primarily to the highway construction industry, the business is seasonal in nature. Traditionally, the Company’s customers reduce their purchases of new equipment for shipment during the summer and fall months to avoid disrupting their peak season for highway construction and related repair work. The majority of orders for the Company’s products are thus received between October and February, with a significant volume of shipments occurring in the late winter and spring. The principal factors driving demand for the Company’s products are the overall economic conditions, the level of government funding for domestic highway construction and repair, Canadian infrastructure spending, the need for spare parts, fluctuations in the price of liquid asphalt, and a trend towards larger more efficient asphalt plants.

On November 15, 2021, President Biden signed into law a five-year, $1.2 trillion infrastructure bill, the Infrastructure Investment and Jobs Act (the “IIJ Act”), including $550 billion in new spending and reauthorization of $650 billion in previously allocated funds. The IIJ Act provides $110 billion for the nation’s highways, bridges and roads.

Fluctuations in the price of carbon steel, which is a significant cost and material used in the manufacturing of the Company’s equipment, may affect the Company’s financial performance. The Company is subject to fluctuations in market prices for raw materials, such as steel. If the Company is unable to purchase materials it requires or is unable to pass on price increases to its customers or otherwise reduce its cost of goods sold, its business results of operations and financial condition may be adversely affected.

Also, a significant increase in the price of liquid asphalt could decrease demand for hot mix asphalt paving materials and certain of the Company’s products. Increases in oil prices also drive up the cost of gasoline and diesel, which results in increased freight costs. Where possible, the Company will pass increased freight costs on to its customers. However, the Company may not be able to recapture all of the higher costs and thus could have a negative impact on the Company’s financial performance.

17

The Company believes its strategy of continuing to invest in product engineering and development and its focus on delivering the highest quality products and superior service will strengthen the Company’s market position. The Company continues to review its internal processes to identify inefficiencies and cost-reduction opportunities. The Company will continue to scrutinize its relationships with suppliers to ensure it is achieving the highest quality materials and services at the most competitive cost.

On July 19, 2022, the Company announced that it was transferring the listing of its common stock, $0.10 per share par value (“Common Stock”), to the NYSE American LLC (“NYSE American”) from the NASDAQ Global Market (“NASDAQ”). Listing and trading of the Company’s Common Stock on NASDAQ ended at market close on July 29, 2022 and listing and trading of its Common Stock on the NYSE American commenced at market open on August 1, 2022 under its current ticker symbol ‘GENC’.

COVID-19 Pandemic

The Company continues to monitor and evaluate the risks to public health and the overall business activity related to the COVID-19 pandemic, including impacts on its employees, customers, suppliers and financial results. As of the date of issuance of this Annual Report, the Company’s operations have not been significantly impacted. However, the full impact of the COVID-19 pandemic continues to evolve subsequent to the year ended September 30, 2022 and as of the date this Annual Report is issued. As such, the full magnitude that the COVID-19 pandemic will have on the Company’s financial condition and future results of operations is uncertain. Management continues to monitor the Company’s financial condition, operations, suppliers, industry, customers, and workforce. As the spread of COVID-19 and its variants continues, the Company’s ability to meet customer demands for products may be impacted or its customers may experience adverse business consequences due to COVID-19 and its variants. Reduced demand for products or ability to meet customer demand (including as a result of disruptions at the Company’s suppliers) could have a material adverse effect on its business operations and financial performance.

Results of Operations

Year ended September 30, 2022 compared with the year ended September 30, 2021

Net revenue for the year ended September 30, 2022 increased 21.3% to $103,479,000 from $85,278,000 for the year ended September 30, 2021. Net revenue for the fourth quarter of fiscal 2022 increased 15.5% to $23,072,000 compared to $20,043,000 for the quarter ended September 30, 2021. The higher revenues in fiscal 2022 reflect increased shipments and progress on large contract orders where revenue is recognized over time.

Gross profit margins decreased to 19.9% in fiscal 2022 from 21.3% in fiscal 2021. Higher manufacturing costs associated with wages, steel, and OEM (Original Equipment Manufacturer) purchased parts had a negative impact on the Company’s operating results in fiscal 2022.

Product engineering and development (“PED”) expense in fiscal 2022 increased by $47,000 to $4,325,000 from $4,278,000 in fiscal 2021. Higher payroll costs in PED expenses in fiscal 2022 were mostly offset by reduced headcount. Selling, general and administrative (“SG&A”) expenses in fiscal 2022 decreased $1,147,000 to $12,052,000 from $13,199,000 in fiscal 2021. The higher SG&A expenses in fiscal 2021 were primarily related to the acquisition of the paver line and professional fees to support business development efforts. Higher payroll costs in SG&A expenses in fiscal 2022 were also mostly offset by reduced headcount.

Fiscal 2022 had operating income of $4,167,000 versus $701,000 in fiscal 2021. The increase in operating income was due to the higher sales and reduced SG&A expenses.

18

On October 1, 2020, the Company acquired the Blaw-Knox assets, including inventory, fixed assets and related intellectual property, from Volvo Construction Equipment North America, LLC (“Volvo CE”). The acquisition provided the Company entry into the asphalt paver sector of the asphalt industry. The acquisition was accounted for as a business combination under ASC 805, “Business Combinations.” The initial purchase price of approximately $14.4 million, which was subject to post-closing adjustments, was funded by cash on hand. After post-closing adjustments transacted during quarter ended March 31, 2021, the final purchase price was $13.8 million, including $10.4 million in inventory and $3.4 million in fixed assets. There were no liabilities assumed. The accompanying consolidated financial statements as of and for the years ended September 30, 2022 and September 30, 2021, include the assets, liabilities and operating results of the paver line. There was no paver equipment revenue during the quarter ended December 31, 2020, as the facility was being readied for production which began in the quarter ended March 31, 2021.

As of September 30, 2022 and 2021, the cost basis of the investment portfolio was $94,879,000 and $93,690,000, respectively. For the year ended September 30, 2022, interest and dividend income, net of fees, from the investment portfolio was $1,305,000, as compared to $1,306,000 for year ended September 30, 2021. Interest income for the year ended September 30, 2021, also included $456,000 of interest collected from a customer. Net realized and unrealized losses on marketable securities were $(7,009,000) for the year ended September 30, 2022 versus net realized and unrealized gains of $4,171,000 for the year ended September 30, 2021. The fiscal 2022 investment losses reflect the general decline in global equity and bond markets. The total cash, cash equivalents and investments balance at September 30, 2022 was $98,881,000, compared to $118,208,000 at September 30, 2021, a decrease of $19,327,000, reflecting the investment losses and increased inventory.

The effective income tax rate for fiscal 2022 was a benefit of (78.0%) versus expense of 12.5% in fiscal 2021. The income tax benefit for fiscal 2022 reflects the impact of book to tax timing differences in the deductibility of certain items, the benefit from research and development tax refunds and credits, and other adjustments.

In fiscal 2022, the Company generated $475,000 of federal research and development tax credits (“R&D Credits”), all of which were used in fiscal 2022. In fiscal 2021, the Company generated $335,000 of R&D Credits, all of which were used in fiscal 2021. There were no R&D Credits carryforwards as of September 30, 2022 or September 30, 2021.

Net loss for the year ended September 30, 2022 was $(372,000) or $(0.03) per diluted share versus net income of $5,805,000 or $0.39 per diluted share for the year ended September 30, 2021.

Liquidity and Capital Resources

The Company generates capital resources through operations and returns from its investments.

The Company had no long-term debt outstanding at September 30, 2022 or 2021. As of September 30, 2022, the Company has funded $85,000 in cash deposits at insurance companies to cover collateral needs. In April 2020, a financial institution issued an irrevocable standby letter of credit (“letter of credit”) on behalf of the Company for the benefit of one of the Company’s insurance carriers. The maximum amount that can be drawn by the beneficiary under the letter of credit is $150,000. The letter of credit expires in April 2023, unless terminated earlier, and can be extended, as provided by the agreement. The Company intends to renew the letter of credit for as long as the Company does business with the beneficiary insurance carrier. The letter is collateralized by restricted cash of the same amount on any outstanding drawings. To date, no amounts have been drawn under the letter of credit.

As of September 30, 2022, the Company had $9,581,000 in cash and cash equivalents, and $89,300,000 in marketable securities. The marketable securities are invested through a professional investment management firm. The securities may be liquidated at any time into cash and cash equivalents.

The Company’s backlog, which includes orders received through the filing date of this Annual Report, was $60.2 million at September 30, 2022 versus $64.1 million at September 30, 2021. The Company’s working capital was $150.1 million at September 30, 2022 versus $155.4 million at September 30, 2021.

The significant purchases, sales and maturities of marketable securities shown on the consolidated statements of cash flows typically reflect the frequent purchase and sale of United States treasury bills. In the fourth quarter of fiscal 2020, the Company liquidated approximately $17.0 million of its investments. The cash was primarily used to fund the October 2020 acquisition of the Blaw-Knox assets.

19

Year ended September 30, 2022 compared with the year ended September 30, 2021

Cash flows used in operations in fiscal 2022 was $9,135,000 primarily resulting from increased inventory. The significant purchases, sales and maturities of marketable securities shown on the consolidated statements of cash flows reflect the recurring purchases and sales of United States treasury bills. Inventories increased by $13,927,000 primarily due to progress on several large contract orders where revenue is recognized at a point in time, the impact of the inflationary environment on raw material and wage price increases, and some stock build to adjust for the increasing lead times from suppliers. Accounts payable increased by $1,146,000 due primarily to the additional payables related to the increase in inventory.

Cash provided by operations in fiscal 2021 was $3,820,000, primarily resulting from net income. The significant purchases, sales and maturities of marketable securities shown on the consolidated statements of cash flows reflect the recurring purchases and sales of United States treasury bills. The decrease in costs and estimated earnings in excess of billings of $4,502,000 reflects the completion and shipment of several large contracts with revenues recognized over time during the year ended September 30, 2021. Excluding the impact of the Blaw-Knox acquisition, inventories increased by $4,413,000 primarily due to progress on several large contract orders where revenue is recognized at a point in time and some stock build to compensate for the longer lead times from suppliers. Accounts payable increased by $1,377,000 due to the additional payables related to the Blaw-Knox business along with the increase in inventory. Customer deposits increased $1,391,000, reflecting the down payments on contract jobs, including several recent orders where revenues are recognized over time but work is yet to begin.

Cash flows used in investing activities for the year ended September 30, 2022 of $4,516,000 were related to the capital expenditures primarily for manufacturing processing and finishing equipment.

Cash flows used in investing activities for the year ended September 30, 2021 of $16,436,000 were primarily related to the acquisition of the Blaw-Knox paver line and subsequent capital expenditures, primarily for systems software and leasehold improvements for the paver line’s manufacturing facility. Cash provided by financing activities of $264,000 for the year ended September 30, 2021, related to proceeds from the exercise of stock options.

Critical Accounting Policies, Estimates and Assumptions

The Company believes the following discussion addresses it’s most critical accounting policies, which are those that are most important to the portrayal of the Company’s financial condition and results of operations and require management’s most difficult, subjective, or complex judgments, often as a result of the need to make estimates about the effect of matters that are inherently uncertain. Accounting policies, in addition to the critical accounting policies referenced below, are presented in Note 1 to the Consolidated Financial Statements, “Accounting Policies.”

Estimates and Assumptions

In preparing the Consolidated Financial Statements, the Company uses certain estimates and assumptions that may affect reported amounts and disclosures. Estimates and assumptions are used, among other places, when accounting for certain revenue (e.g., contract accounting), expense, and asset and liability valuations. The Company believes that the estimates and assumptions made in preparing the Consolidated Financial Statements are reasonable, but are inherently uncertain. Assumptions may be incomplete or inaccurate and unanticipated events may occur. The Company is subject to risks and uncertainties that may cause actual results to differ from estimated results.

Revenues & Expenses

The Company accounts for revenues and related expenses under the provisions of ASU No. 2014-09, Revenue from Contracts with Customers (Topic 606), as amended (“ASU No. 2014-09”).

20

Revenues from contracts with customers for the design, manufacture and sale of custom equipment are recognized over time when the performance obligation is satisfied by transferring control of the equipment. Control of the equipment transfers over time as the equipment is unique to the specific contract and thus does not create an asset with an alternative use to the Company. Revenues and related costs are recognized in proportion to actual labor costs incurred, as compared with total estimated labor costs expected to be incurred during the entire contract. All incremental costs related to obtaining a contract are expensed as incurred as the amortization period is less than one year. Changes to total estimated contract costs or losses, if any, are recognized in the period in which they are determined.

Contract assets (excluding accounts receivable) under contracts with customers represent revenue recognized in excess of amounts billed on equipment sales recognized over time. These contract assets were $2,118,000 and $1,903,000 at September 30, 2022 and 2021, respectively, and are included in current assets as costs and estimated earnings in excess of billings on the Company’s consolidated balance sheets. The Company anticipates that all of the contract assets at September 30, 2022, will be billed and collected within one year.

Revenues from all other contracts for the design and manufacture of equipment, for service and for parts sales, net of any discounts and return allowances, are recorded at a point in time when control of the goods or services has been transferred. Control of the goods or service typically transfers at time of shipment or upon completion of the service.

Payment for equipment under contract with customers is typically due prior to shipment. Payment for services under contract with customers is due as services are completed. Accounts receivable related to contracts with customers at September 30, 2022 and September 30, 2021 were $142,000 and $210,000, respectively.

Product warranty costs are estimated using historical experience and known issues and are charged to production costs as revenue is recognized.

Under certain contracts with customers, recognition of a portion of the consideration received may be deferred and recorded as a contract liability if the Company has to satisfy a future obligation, such as to provide installation assistance. There were no contract liabilities other than customer deposits at September 30, 2022 and September 30, 2021. Customer deposits related to contracts with customers were $5,864,000 and $5,244,000 at September 30, 2022 and 2021, respectively, and are included in current liabilities on the Company’s consolidated balance sheets.

The Company records revenues earned for shipping and handling as freight revenue at the time of shipment, regardless of whether or not it is identified as a separate performance obligation. The cost of shipping and handling is classified as cost of goods sold concurrently.

Provisions for estimated returns and allowances and other adjustments are provided for in the same period the related sales are recorded. Returns and allowances, which reduce product revenue, are estimated using historical experience. All product engineering and development costs, and selling, general and administrative expenses are charged to operations as incurred. Provision is made for any anticipated contract losses in the period that the loss becomes evident. The allowance for doubtful accounts is determined by performing a specific review of all account balances greater than 90 days past due and other higher risk amounts to determine collectability and also adjusting for any known customer payment issues with account balances in the less-than-90-day past due aging buckets. Account balances are charged off against the allowance for doubtful accounts when they are determined to be uncollectable. Any recoveries of account balances previously considered in the allowance for doubtful accounts reduce future additions to the allowance for doubtful accounts.

Inventories

Inventories are valued at the lower of cost or net realizable value, with cost being determined under the first-in, first-out (“FIFO”) method and net realizable value defined as the estimated selling price of goods less reasonable costs of completion and delivery (see Note 2 to Consolidated Financial Statements). Appropriate consideration is given to obsolescence, excessive levels, deterioration, possible alternative uses and other factors in determining net realizable value. The cost of work in process and finished goods includes materials, direct labor, variable costs and overhead. The Company evaluates the need to record inventory adjustments on all inventories, including raw materials, work in process, finished goods, spare parts and used equipment. Used equipment acquired by the Company on trade-in from

21

customers is carried at estimated net realizable value. Unless specific circumstances warrant different treatment regarding inventory obsolescence, an allowance is established to reduce the cost basis of inventories three to four years old by 50%, the cost basis of inventories four to five years old by 75%, and the cost basis of inventories greater than five years old to zero. Inventory is typically reviewed for obsolescence on an annual basis computed as of September 30, the Company’s fiscal year end. If significant known changes in trends, technology or other specific circumstances that warrant consideration occur during the year, then the impact on obsolescence is considered at that time.

Investments

Marketable debt and equity securities are categorized as trading securities and are thus marked to market and stated at fair value. Fair value is determined using the quoted closing or latest bid prices for Level 1 investments and market standard valuation methodologies for Level 2 investments. Realized gains and losses on investment transactions are determined by specific identification and are recognized as incurred in the consolidated statements of operations. Net unrealized gains and losses are reported in the consolidated statements of operations and represent the change in the fair value of investment holdings during the period.

Long Lived Asset Impairment

Property and equipment, and intangible assets subject to amortization are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset (or asset group) may not be recoverable. An impairment loss would be recognized when the carrying amount of an asset exceeds the estimated undiscounted cash flows expected to result from the use of the asset and its eventual disposition. The amount of the impairment loss to be recorded is calculated by the excess over its fair value of the asset’s carrying value. Fair value is generally determined using a discounted cash flow analysis.

Inflation

The overall effects of inflation on the Company’s business during fiscal 2022 and 2021 have been significant relative to prior years. The Company monitors the prices it charges for its products and services on an ongoing basis and has been able to adjust its prices to take into account future changes in the rate of inflation.

Contractual Obligations

The Company had no long-term or short-term debt as of September 30, 2022 and there was no long-term debt facility in place at September 30, 2022.

In April 2020, a financial institution issued an irrevocable standby letter of credit (“letter of credit”) on behalf of the Company for the benefit of one of the Company’s insurance carriers. The maximum amount that can be drawn by the beneficiary under the letter of credit is $150,000. The letter of credit expires in April 2023, unless terminated earlier, and can be extended, as provided by the agreement. The Company intends to renew the letter of credit for as long as the Company does business with the beneficiary insurance carrier. The letter is collateralized by restricted cash of the same amount on any outstanding drawings. To date, no amounts have been drawn under the letter of credit.

On August 28, 2020, the Company entered into a three year operating lease for property related to the manufacturing and warehousing of the Blaw-Knox paver business. The lease term is for the period September 1, 2020 through August 31, 2023. On October 9, 2020, the Company entered into an operating lease for additional warehousing space for paver inventory. The lease term is for one year beginning November 2020 with automatic one-year renewals.

Off-Balance Sheet Arrangements

None

Not applicable.

22